stainless steel brake line kit - 6 lines - late 2002, E9, E12, early E24

Purchase stainless steel brake line kit - 6 lines - late 2002, E9, E12, early E24

"Performance tune" your braking system.

Stainless steel brake lines for improved braking performance 100% MADE IN USA and DOT-COMPLIANT

applications:

2002/2002tii/1600 models 1969-1974 2500 - 3.0CS/i/L Coupes 1968-1977 E12 530i/528i 1972-1979 E24 633CSi/630CSi 1976-1981

Original brake lines are rubber and can expand under the normal pressure of use. This expansion of the brake line negatively affects the brake caliper piston travel, and makes for mushy pedal feedback.

UUC's Stainless Steel Brake lines are used to "performance tune" your braking system.

Inner Teflon® line is covered with woven stainless steel braid that will not expand under pressure. The advantages include better brake pedal feedback and a firmer pedal, along with superior brake modulation. Results will be immediate.

Technical features:

• fully compliant with DOT Standards (MVSS-1006)
  
  
• lines burst-tested to 6000psi
  (maximum tested pressure from a BMW braking system is 1200psi)
  
  
• Teflon® inner line covered with a woven layer of stainless steel and covered in an abrasion-resistant material (translucent blue plastic covering).
  
  
• plastic end pieces protect assembly, no exposed steel fibers to stick fingers.

(c) 2004-2011 UUC Motorwerks

Purchase stainless steel brake line kit - 6 lines - late 2002, E9, E12, early E24